Host Connection

Can I boot from my MicroNet device?
Yes! As long as your host hardware and operating system support booting from an external storage device. Refer to your computer’s documentation for more inf...
Mon, 10 Apr, 2017 at 2:03 PM
Can I connect firewire storage along with my firewire capture device?
Please make sure to use a SEPARATE FIREWIRE BUS to attach any FireWire attached Audio Visual capture devices. Daisy chaining such devices can harm your Plat...
Mon, 10 Apr, 2017 at 2:03 PM
Do Fantom USB 3.0 drives require a direct-to-host connection or can I use my hub?
Under most circumstances, you may plug in the drive to a USB hub with the following caveats: If the disk is not functioning or has mounts intermittent...
Mon, 10 Apr, 2017 at 2:04 PM
I'm having trouble seeing my eSATA device
eSATA host connections require the SATA host bus to support the following: AHCI Mode Enabled and Active eSATA shielded cable with a blade depth (the rece...
Mon, 10 Apr, 2017 at 2:04 PM
I'm trying to install the PCI-Express eSATA card in my Dell Poweredge 2450 (or other brand of Intel 5000 based server) but the card is not seen by my system.
Some server vendors block the eSATA card in BIOS, or have physical connectivity limitations with their expansion bus risers. You may require an updated firm...
Mon, 10 Apr, 2017 at 2:05 PM
My USB 3.0 Fantom product works fine with a USB 2.0 Connection but not USB 3.0
USB 3.0 is fully backwards compatible with USB 2.0 host busses. Essentially, a USB 3.0 host bus should function in the same manner, but depending on the add...
Mon, 10 Apr, 2017 at 2:05 PM